More pricing below, click here!
Please Note: All Prices are Inclusive of GST
The HD1 Dome provides single-cellular Bandwidth Bonding in an IP67 enclosure that has a minimal profile on the rooftop while providing maximum signal. With redundant SIM, the HD1 Dome supports single cellular radios and four SIM cards. Combine the HD1 Dome with the SIM Injector, and the number of cards increases to twelve.
The HD1 Dome has a M35 screw mount, and only requires a single Ethernet cable to install. For wall or pole mounted deployments, the HD1 Dome comes with an Ethernet splitter and a mounting rack that provides a multitude of installation options.
With the addition of the SIM Injector, the HD1 Dome can support up to 12 SIM at your fingertips. Simply connect an Ethernet cable between the SIM Injector and the HD1 Dome. The SIM Injector is capable of PoE output, so you don't need to add another PoE switch to your deployment.
With built-in GPS fleet tracking and InControl 2 cloud-based management, you can keep tabs on location and manage your mobile network from any Internet-connected device. InControl 2 is our cloud based device management, monitoring, and reporting tool designed specifically for Peplink and Pepwave devices.
SpeedFusion allows users to combine any number of connections together to form a point-to-point link to achieve what others cannot
The HD1 Dome offers significant deployment flexibility due to its modular construction. By itself, it has an M35 thread, making it easy to mount on top of any pole or on the rooftop of any vehicle.
The HD1 Dome comes with an Ethernet splitter that enables an additional GE LAN output. With the splitter installed, the HD2 Dome can then be used with the included mounting bracket to fix onto any wall, or to securely tie onto any pole.
The HD1 Dome, Ethernet splitter, and the mounting bracket are all included, so you can deploy this device just about anywhere.
Together, the HD1 Dome and SIM Injector can make deployments significantly easier to set up and manage.
|MAX HD 1 Dome
|1x Embedded LTE Modems with Redundant SIM Slots#
|1x 10/100/1000M Ethernet Port
|1.2 Gbps/150 Mbps (CAT-18)
|Rugged outdoor IP67
|4x4 Internal MIMO Antennas
1x Internal GPS Antenna
|Built-In Omni Antenna
Antenna gain: 5dBi
|1x Power over Ethernet 802.3at
|4.33in. (radius) x 4.49in. (height) | 110mm (radius) x 114mm (height)
|With Ethernet Splitter (1700 grams, 3.75 pounds)) | Without Ethernet Splitter (1200 grams, 2.65 pounds)
|-40° - 149°F | -40° - 65°C
|15% - 95% (non-condensing)
|FCC, CE, RoHS
Shock and Vibration Resistance: EN 61373:1999 IEC 61373:1999
RF Port Lighting Immunity - ITU-T K.20 (+/- 1.5 kV)
|MAX HD1 Dome
C14 power cord
|1-Year Limited Warranty
Download the MAX HD 1 Dome Datasheet (PDF).